B12 CB TA
ESH10000462 · Rev R2
Generated 2026-07-26 13:59 UTC
Coverage
0%
Done
0%
Requirements
0
Test Cases
7
Records
0
Milestones
No milestones defined.
Items (1)
| Code | Status | Severity | Kind | Title | Date |
|---|---|---|---|---|---|
| E-001 | open | info | decision | BOM baseline: imported MES ESH10000462 R1 (46 rows / 204 components) as R2 starting point on 2026-05-29 | 2026-05-29 |
Requirements
| Code | Status | Category | Title | Statement | Acceptance |
|---|---|---|---|---|---|
| REQ-EL-001 | draft | compliance | RoHS Compliance | The design shall use only RoHS-compliant materials. All BOM items must have a valid RoHS certificate of compliance. | Valid RoHS certificate of compliance on file for all BOM line items. |
| REQ-EL-002 | draft | compliance | REACH / SVHC Declaration | The design shall comply with the REACH regulation. Any SVHC present above 0.1 % w/w in any article shall be declared. | REACH/SVHC declaration obtained from all component suppliers and filed in the project documentation. |
| REQ-EL-003 | draft | compliance | EMC Compliance | The design shall comply with applicable EMC standards for conducted and radiated emissions. | Pass pre-compliance scan and, where required, certified lab test. |
| REQ-EL-004 | draft | environmental | Operating Temperature Range | The design shall operate correctly and without damage across the full ambient temperature range specified in the design brief. | Functional test passes at minimum and maximum rated ambient in an environmental chamber. |
| REQ-EL-005 | draft | robustness | ESD Protection | All external interfaces shall tolerate ESD events of at least ±4 kV (contact) and ±8 kV (air) per IEC 61000-4-2 without permanent damage or loss of function. | ESD test passes at specified levels with no permanent damage. |
| REQ-EL-006 | draft | compliance | CE Marking Applicability | CE marking applicability shall be assessed at project start. If the product is placed on the EU / EEA market, it shall be CE-marked per the applicable EU directives (typically LVD, EMC Directive, RoHS Directive, and RED if any radio equipment), with a signed Declaration of Conformity on file. If the product is NOT placed on the EU / EEA market, the market scope decision shall be recorded as a `please_decision_create` so CE assessment can be skipped knowingly. | CE marking applicability assessed and the assessment recorded as a `please_decision`. For products in EU/EEA market scope: applicable EU directives identified, conformity assessment complete, signed Declaration of Conformity on file, CE mark properly affixed. For products outside EU/EEA market scope: a `please_decision` documents the market scope and the CE-skip rationale. |
| REQ-EL-007 | draft | quality | Test Limit Derivation Documented | Every test case that defines numeric measurement limits (low_limit, high_limit, nominal, tolerancePct) shall have a documented derivation explaining how those limits were chosen. | For each test case with numeric limits, evidence of derivation exists — `passCriterion` references the component values and tolerances in the measurement path, OR a linked `please_decision` documents the corner math, OR the implementing Maestro YAML carries a `Limit derivation` comment block citing such a decision. |
Test Cases
| Code | Status | Category | Title / Signal | Target | Pass Criterion | Linked REQ |
|---|---|---|---|---|---|---|
| TC-EL-001 | open | compliance | RoHS CoC Collection | — | Obtain and file RoHS certificate of compliance for each BOM line item before releasing the design to production. | REQ-EL-001 |
| TC-EL-002 | open | compliance | REACH Declaration Collection | — | Obtain REACH/SVHC declaration from each component supplier; file in the project documentation. | REQ-EL-002 |
| TC-EL-003 | open | compliance | EMC Pre-Compliance Scan | — | Run conducted and radiated emissions scan; verify results are below applicable limits. | REQ-EL-003 |
| TC-EL-004 | open | environmental | Temperature Range Functional Test | — | Operate unit at minimum and maximum rated ambient for at least 30 minutes each; verify correct function and no damage. | REQ-EL-004 |
| TC-EL-005 | open | robustness | ESD Immunity Test | — | Apply ESD events to all external connectors per IEC 61000-4-2 at ±4 kV contact / ±8 kV air; verify no permanent damage or loss of function. | REQ-EL-005 |
| TC-EL-006 | open | compliance | CE Marking + Declaration of Conformity Audit | — | Confirm a `please_decision` records the CE applicability assessment. For products in EU/EEA market scope: confirm applicable EU directives are identified, conformity assessment is complete, signed Declaration of Conformity is on file, and CE mark is affixed per directive requirements. For products outside EU/EEA market scope: confirm the `please_decision` documents the market scope and CE-skip rationale. | REQ-EL-006 |
| TC-EL-007 | open | quality | Limit Derivation Audit | — | For each test case in this project that has numeric limits, confirm at least one derivation source exists: (a) `passCriterion` field includes tolerance / component references, OR (b) a `please_decision` is linked covering the limit derivation, OR (c) the implementing Maestro YAML has a `Limit derivation` comment block citing a decision id. Reference example: PT-SIG.04 + `please_decision` D.03 in projectId 1. | REQ-EL-007 |
Verification Records
No verification records.
Decisions
E-001
BOM baseline: imported MES ESH10000462 R1 (46 rows / 204 components) as R2 starting point on 2026-05-29
info
2026-05-29
Decision: The PLEASE BOM for projectId 39 (ESH10000462 R2 "B12 CB TA") was seeded from the MES R1 BOM as the starting baseline.
Source: mcp__sharpmes__get_bom_for_product(productId="ESH10000462", revision="1") — 46 BOM rows from MES rev 1 (status Manufacturing at time of import).
Result: please_component_create_bulk succeeded for all 46 rows, expanded to 204 individual bom_component records (PLEASE auto-expanded the refdes ranges).
Rationale: MES does not yet have an R2 BOM (R0 Obsolete + R1 Manufacturing are the only revisions). R2 is in-progress; importing R1 gives a baseline that the engineer iterates inside PLEASE as the R2 design evolves. Eventually MES R2 BOM will be authored matching the finalised R2 design.
Field mapping (MES → PLEASE): partNumber, partName, category, description, noMount, referenceDesignators (range strings passed through; PLEASE auto-expanded). quantity omitted (inferred from refdes expansion). alternatePartNumber / orderComment not populated in any source row, so nothing to preserve.
Follow-up:
- As R2 design diverges from R1, add / remove / modify
bom_componentrows on this project to reflect the actual R2 BOM. Use the PLEASE component-management tools, not MES (MES doesn't have R2 yet). - When MES R2 is eventually authored, the PLEASE BOM should be re-baselined against MES R2:
please_bom_clear projectId=39then re-ingest fromget_bom_for_product("ESH10000462", "2"). File a new decision entry recording the re-baseline. - The two noMount-split rows (EGP10000001 Resistor 0, EGP10000097 Resistor 10k, EGP10000641 0402-100nF, EGP10001458 0603-1uF) are preserved as separate PLEASE rows with
noMount=true/falsematching the MES split. This keeps the DNP groups distinct.
Related projects: ETT00000004 (B12 CB Testrig BOM Review, projectId 38) — the May 2026 BOM-review archive references ESH10000462 at R1.
Design Rule Status
■ No violations ■ Warning ■ Error ■ Waived
Bill of Materials
| Ref | Part # | Part Name | Category | Qty | Description |
|---|---|---|---|---|---|
| C1 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| C10 | EGP10000878 | Capacitor 22uF | Capacitor | 1 | — |
| C11 | EGP10000878 | Capacitor 22uF | Capacitor | 1 | — |
| C12 | EGP10000641 | CAP0402 100nF 0.1uF 50V X7R | Capacitor | 1 | CAP CER 0.1UF 50V X7R 0402 |
| C13 | EGP10000641 | CAP0402 100nF 0.1uF 50V X7R | Capacitor | 1 | CAP CER 0.1UF 50V X7R 0402 |
| C14 | EGP10000641 | CAP0402 100nF 0.1uF 50V X7R | Capacitor | 1 | CAP CER 0.1UF 50V X7R 0402 |
| C15 | EGP10000641 | CAP0402 100nF 0.1uF 50V X7R | Capacitor | 1 | CAP CER 0.1UF 50V X7R 0402 |
| C18 | EGP10000641 | CAP0402 100nF 0.1uF 50V X7R | Capacitor | 1 | CAP CER 0.1UF 50V X7R 0402 |
| C19 | EGP10000641 | CAP0402 100nF 0.1uF 50V X7R | Capacitor | 1 | CAP CER 0.1UF 50V X7R 0402 |
| C2 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| C20 | EGP10001457 | CAP0402 1uF 25V X5R PDN f 11 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 25V 0402 X5R 10%. PDN f 11MHz, C 1uF, ESR 1mOhm, ESL 0.209nH. See EGP10000650 for looser spec. |
| C21 | EGP10001457 | CAP0402 1uF 25V X5R PDN f 11 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 25V 0402 X5R 10%. PDN f 11MHz, C 1uF, ESR 1mOhm, ESL 0.209nH. See EGP10000650 for looser spec. |
| C22 | EGP10001457 | CAP0402 1uF 25V X5R PDN f 11 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 25V 0402 X5R 10%. PDN f 11MHz, C 1uF, ESR 1mOhm, ESL 0.209nH. See EGP10000650 for looser spec. |
| C23 | EGP10001455 | CAP0402 2u2F 2.2uF 25V X5R PDN f 6 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 2u2 25V 0402 X5R 10%. PDN f 6MHz, C 2.2uF, ESR 7mOhm, ESL 0.320nH |
| C24 | EGP10000598 | Capacitor 27p | Capacitor | 1 | CAP CER 27pF 50V NP0 0402 |
| C25 | EGP10000598 | Capacitor 27p | Capacitor | 1 | CAP CER 27pF 50V NP0 0402 |
| C26 | EGP10001456 | CAP0603 2u2F 2.2uF 50V X5R PDC f 5 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 2.2uF 50V 0603 X5R 10%. PDN f 5MHz, C 2.2uF, ESR 5mOhm, ESL 0.461nH |
| C27 | EGP10001456 | CAP0603 2u2F 2.2uF 50V X5R PDC f 5 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 2.2uF 50V 0603 X5R 10%. PDN f 5MHz, C 2.2uF, ESR 5mOhm, ESL 0.461nH |
| C28 | EGP10001452 | CAP1206 47uF 16V X5R PDN f 1 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 47uF 16V 1206 X5R 20%. PDN f 1MHz, C 47uF, ESR 2mOhm, ESL 0.539nH. LCSC: C385047 |
| C3 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| C6 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| C7 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| C8 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| C9 | EGP10001458 | CAP0603 1uF 50V X5R PDN f 9 MHz | Capacitor | 1 | Multilayer Ceramic Capacitor 1uF 50V 0603 X5R 10%. PDN f 9MHz, C 1uF, ESR 8mOhm, ESL 0.313nH. GRT188R61H105KE13D |
| D1 | EGP10001527 | Zener 3.6V | Diode | 1 | Zener 3.6V 0.25W |
| D2 | EGP10001527 | Zener 3.6V | Diode | 1 | Zener 3.6V 0.25W |
| D3 | EGP10001527 | Zener 3.6V | Diode | 1 | Zener 3.6V 0.25W |
| D4 | EGP10001527 | Zener 3.6V | Diode | 1 | Zener 3.6V 0.25W |
| J1 | EGP10000973 | APF6-025-03.5-L-04-0-T-TR_NSB | Connector | 1 | Samtec APF6-T 25x4 AcceleRateHP. Surface Mount 0.635 mm. Locking Socket (No latch). AKA 25x4 Internal HC3 socket. SNPS reference: SH100005432. |
| J10 | EGP10001209 | ARF6-16-L-D-A-K-TR | Connector | 1 | Samtec ARF6-16 (25x2) AcceleRate. Surface Mount 0.635 mm. SNPS reference: SH100003165. |
| J11 | EGP10001412 | Q2 B2B conn receptable | Connector | 1 | 0.5mm 2 Standing paste SMD P 0.5mm Board-to-Board and Backplane Connector ROHS. Used for Q2 Top boards. LCSC C3644328. Used on all N-TOP boards. |
| J12 | EGP10001412 | Q2 B2B conn receptable | Connector | 1 | 0.5mm 2 Standing paste SMD P 0.5mm Board-to-Board and Backplane Connector ROHS. Used for Q2 Top boards. LCSC C3644328. Used on all N-TOP boards. |
| J13 | EGP10001566 | USB-C 3.2 Vertical 24pin | Connector | 1 | — |
| J2 | EGP10000973 | APF6-025-03.5-L-04-0-T-TR_NSB | Connector | 1 | Samtec APF6-T 25x4 AcceleRateHP. Surface Mount 0.635 mm. Locking Socket (No latch). AKA 25x4 Internal HC3 socket. SNPS reference: SH100005432. |
| J3 | EGP10000973 | APF6-025-03.5-L-04-0-T-TR_NSB | Connector | 1 | Samtec APF6-T 25x4 AcceleRateHP. Surface Mount 0.635 mm. Locking Socket (No latch). AKA 25x4 Internal HC3 socket. SNPS reference: SH100005432. |
| J4 | EGP10000973 | APF6-025-03.5-L-04-0-T-TR_NSB | Connector | 1 | Samtec APF6-T 25x4 AcceleRateHP. Surface Mount 0.635 mm. Locking Socket (No latch). AKA 25x4 Internal HC3 socket. SNPS reference: SH100005432. |
| J6 | EGP10001137 | 0878321420 | Connector | 1 | CONN HEADER SMD 14POS 2MM Shrouded |
| J7 | EGP10001137 | 0878321420 | Connector | 1 | CONN HEADER SMD 14POS 2MM Shrouded |
| J8 | EGP10001535 | CONN HEADER SMD 12POS 2MM 2ROW Shrouded w Latch Holder | Connector | 1 | — |
| J9 | EGP10001536 | CONN HEADER SMD 4POS 2MM JST PH Series | Connector | 1 | Connector Header Surface Mount 4 position 2.00mm Wire-to-Board SMD 2A 100V JST PH series |
| L1 | EGP10001542 | Ferrite Bead 0603 330 Ohm 100MHz | Inductor | 1 | Ferrite Beads Multi-Layer 330Ohm 25% 100MHz 500mA 300mOhm DCR 0603 |
| L2 | EGP10001542 | Ferrite Bead 0603 330 Ohm 100MHz | Inductor | 1 | Ferrite Beads Multi-Layer 330Ohm 25% 100MHz 500mA 300mOhm DCR 0603 |
| M1 | EGP10001481 | SMTSO3250CTJ | Mechanical | 1 | SMD unthreaded 3.2mm spacer 5mm height. https://www.sinhoost.com/Product/PCB-SMT-Muts-SMTSO.html |
| M2 | EGP10001481 | SMTSO3250CTJ | Mechanical | 1 | SMD unthreaded 3.2mm spacer 5mm height. https://www.sinhoost.com/Product/PCB-SMT-Muts-SMTSO.html |
| M3 | EGP10001481 | SMTSO3250CTJ | Mechanical | 1 | SMD unthreaded 3.2mm spacer 5mm height. https://www.sinhoost.com/Product/PCB-SMT-Muts-SMTSO.html |
| M4 | EGP10001481 | SMTSO3250CTJ | Mechanical | 1 | SMD unthreaded 3.2mm spacer 5mm height. https://www.sinhoost.com/Product/PCB-SMT-Muts-SMTSO.html |
| Q1 | EGP10001540 | PMF63UNE | Transistor | 1 | MOSFET N-ch 20V 2.2A w/ ESD protection. Enhancement mode FET in SOT323/SC-70 SMD plastic package using Trench MOSFET technology. Low threshold voltage. ElectroStatic Discharge (ESD) protection 2 kV HBM |
| Q2 | EGP10001540 | PMF63UNE | Transistor | 1 | MOSFET N-ch 20V 2.2A w/ ESD protection. Enhancement mode FET in SOT323/SC-70 SMD plastic package using Trench MOSFET technology. Low threshold voltage. ElectroStatic Discharge (ESD) protection 2 kV HBM |
| Q3 | EGP10001540 | PMF63UNE | Transistor | 1 | MOSFET N-ch 20V 2.2A w/ ESD protection. Enhancement mode FET in SOT323/SC-70 SMD plastic package using Trench MOSFET technology. Low threshold voltage. ElectroStatic Discharge (ESD) protection 2 kV HBM |
| R1 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R10 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R100 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R102 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R104 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R105 | EGP10000050 | Resistor 100 | Resistor | 1 | — |
| R106 | EGP10001035 | CRCW0402205RFKED | Resistor | 1 | 205 Ohms 1 0.063W 1/16W Chip Resistor 0402 1005 Metric Automotive AEC-Q200 Thick Film |
| R107 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R108 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R109 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R11 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R110 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R111 | EGP10000133 | Resistor 330k | Resistor | 1 | — |
| R112 | EGP10000037 | Resistor 30 | Resistor | 1 | — |
| R113 | EGP10000037 | Resistor 30 | Resistor | 1 | — |
| R114 | EGP10000037 | Resistor 30 | Resistor | 1 | — |
| R115 | EGP10000037 | Resistor 30 | Resistor | 1 | — |
| R116 | EGP10000037 | Resistor 30 | Resistor | 1 | — |
| R117 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R118 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R119 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R12 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R120 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R121 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R122 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R123 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R124 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R125 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R126 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R127 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R128 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R129 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R13 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R130 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R131 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R132 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R133 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R134 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R135 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R14 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R15 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R16 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R17 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R18 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R19 | EGP10001012 | Resistor 31K6 | Resistor | 1 | — |
| R2 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R20 | EGP10000099 | Resistor 12k | Resistor | 1 | — |
| R21 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R22 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R23 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R24 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R25 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R26 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R27 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R28 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R29 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R3 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R30 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R31 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R32 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R33 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R34 | EGP10000099 | Resistor 12k | Resistor | 1 | — |
| R35 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R36 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R37 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R38 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R39 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R4 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R40 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R41 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R42 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R43 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R44 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R45 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R46 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R47 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R48 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R49 | EGP10000089 | Resistor 4k7 | Resistor | 1 | — |
| R5 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R50 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R51 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R52 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R53 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R54 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R55 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R56 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R6 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R60 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R61 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R62 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R63 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R66 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R67 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R69 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R7 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R70 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R71 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R72 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R73 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R74 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R75 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R76 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R77 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R78 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R79 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R8 | EGP10000082 | Resistor 2k4 | Resistor | 1 | 2.4k Ohm. LCSC C25882 |
| R81 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R82 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R84 | EGP10000073 | Resistor 1k | Resistor | 1 | — |
| R85 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R86 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R87 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R88 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R89 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R9 | EGP10000097 | Resistor 10k | Resistor | 1 | — |
| R90 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R91 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R92 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R93 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R94 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| R98 | EGP10000001 | Resistor 0 | Resistor | 1 | — |
| U1 | EGP10001232 | PCA9506BS,118 | IntegratedCircuit | 1 | IC XPNDR 400KHZ I2C 56HVQFN. I/O Expander 40 I2C 400 kHz 56-HVQFN (8x8) |
| U10 | EGP10001409 | SN74AVC4T774 | IntegratedCircuit | 1 | Level Shifting and 3-State Outputs With Independent Direction Controls |
| U11 | EGP10001568 | TMUX1574RSVR | IntegratedCircuit | 1 | IC SWITCH SPDT X 4 4.5OHM 16UQFN. Low-Capacitance 2:1 SPDT 4-Channel Powered-Off Protected Switch with 1.8 V Logic |
| U12 | EGP10001470 | SN74LVC125APW | IntegratedCircuit | 1 | Buffer/Inverting 4 Element 1 Bit per Element 3-State Output 14-TSSOP |
| U13 | EGP10001543 | TCA9803 | IntegratedCircuit | 1 | 2-bit level-translating 400-kHz I2C SMBus buffer repeater with internal 3-mA current source. ORDER INFO: TCA9803DGKT 250 units reel / TCA9803DGKR 2500 units reel |
| U14 | EGP10001543 | TCA9803 | IntegratedCircuit | 1 | 2-bit level-translating 400-kHz I2C SMBus buffer repeater with internal 3-mA current source. ORDER INFO: TCA9803DGKT 250 units reel / TCA9803DGKR 2500 units reel |
| U2 | EGP10001232 | PCA9506BS,118 | IntegratedCircuit | 1 | IC XPNDR 400KHZ I2C 56HVQFN. I/O Expander 40 I2C 400 kHz 56-HVQFN (8x8) |
| U3 | EGP10001467 | 24AA025UIDT-I/OT | IntegratedCircuit | 1 | IC EEPROM 2KBIT I2C SOT23-6 |
| U4 | EGP10001467 | 24AA025UIDT-I/OT | IntegratedCircuit | 1 | IC EEPROM 2KBIT I2C SOT23-6 |
| U5 | EGP10001467 | 24AA025UIDT-I/OT | IntegratedCircuit | 1 | IC EEPROM 2KBIT I2C SOT23-6 |
| U6 | EGP10001062 | AMS1117-ADJ | IntegratedCircuit | 1 | IC LDO REG ADJ 1A SOT223 |
| U7 | EGP10001067 | ECX2-LMV-3CN-100.000-TR | IntegratedCircuit | 1 | XTAL OSC XO 100.0000MHZ LVDS SMD |
| U8 | EGP10001539 | 93LC56B-I/SN | IntegratedCircuit | 1 | IC EEPROM 2KBIT SPI |
| U9 | EGP10001544 | FT4232H | IntegratedCircuit | 1 | Quad High-Speed USB to Multi-Purpose UART/MPSSE IC |
| X1 | EGP10001538 | 8Z-12.000MAAJ | IntegratedCircuit | 1 | 12.0000MHz Crystal 18pF 30ppm 150ohm |